3D Printed Custom Drill Accessory Kit



HOME MADE MODERN

Follow Jamie on Instagram:
Check out Robo 3D printers:
check out the HomeMade Modern page on shapeways:

Settings for Robo R2

Material: PLA
Profile: Normal Quality

(Recommend)

Layer Height: 0.1mm
Wall Thickness: 1mm
Top/bottom thickness: 1mm
Infill density: 20%
Overlap percentage: 8%
Print temp: 195 degrees celsius
Build plate temp: 60 degrees celsius
Diameter: 1.75mm
Flow: 100%
Enable retraction: checked
Retraction minimum travel: 5mm
Print speed: 50mm/s
Travel speed: 100mm/s
Initial Layer Speed: 15mm/s
Enable cooling: checked
Fan speed: 75%
Regular fan speed at layer: 30%
Enable support: checked
Build plate adhesion type: Raft
Raft air gap: 0.2mm
Initial layer Z overlap: 0.1mm
Raft top layers: 3


Related Posts


Thanks For Sharing